MagMod Professional Flash Kit

Description

MagMod Professional Flash Kit
Make the most of your on-camera flash with the array of modifiers made available in the Professional Flash Kit from MagMod. This bundle stars the MagGrip, a simple and effective solution for attaching and removing accessories from your flash through the use of magnets. The kit then bundles in a variety of modifiers, including the MagSphere diffuser, the MagBounce, the MagGrid, and the MagGel with the Creative Gel Set. MagSphere Transform your on-camera flash into an omni-directional light source with the MagSphere, designed for use with the MagMod flash modifier system. The soft, diffused light is flattering and it has an integrated gel slot for adjusting the color of your flash. The two neodymium rare-earth magnets allow it to quickly attach to a separately available MagGrip, as well as other modifiers, such as a MagGrid, for more control over your light. Additionally, it is made from molded silicone rubber for a sleek, simple design with good durability and it comes with a microfiber carrying pouch. MagBounce Increase the apparent size of your flash by about 300% with the MagBounce, designed for use with the MagMod flash modifier system. The soft, diffused light produced by this attachment functions similarly to a softbox and cast the beam over a large area. Also, the MagBounce can be oriented in one of four different positions for use in both portrait and landscape shootings thanks to the attachment with four neodymium rare-earth magnets. With this system, the MagBounce can be used in combination with other accessories, such as the MagGel. It is made from molded silicone rubber for a sleek, simple design with good durability and comes with a microfiber carrying pouch. MagGrid Control light spill and narrow your flash's beam angle to 40° with the MagGrid, designed for the MagModflash modifier system. This grid efficiently focuses the light and attaches to the MagGrip via two neodymium rare-earth magnets. Also, it is stackable with other accessories and even other MagGrids, allowing users to further narrow their beam angle. It is made from molded silicone rubber for a sleek, simple design with good durability. MagGel Holder Mount and swap out gels on your flash quickly and easily with this MagGel Holder for the MagModmodifier system. The silicone rubber slot holds up to 3 MagMod gels and snaps on to the MagMod system via two neodymium rare-earth magnets. Also, it is stackable with additional holders and other MagMod accessories. Creative Gel Set Add some flair and creativity to your lighting with this Creative Gel Set designed for use with the MagMod flash modifier system. The kit includes red, orange, yellow, green, blue, teal, purple, and magenta gels made from a rigid polycarbonate for durability and easier handling. They easily slide into the MagMod gel slot for quick attachment and removal. MagGrip Made from an elastic silicone rubber, the MagGrip from MagMod stretches over the head of most on-camera flash units and provides two neodymium rare-earth magnets for quickly mounting a variety of accessories from the MagMod flash modifier system. The rubber offers a secure, tight grip on the flash head and is durable. Also, the flash head should be about 2.5" wide for the modifiers to be able to properly attach to the flash head. Compatible Flashes Canon: 380EX, 420EX, 430EX, 430EX II, 540EZ, 550EX, 580EX, 580EX II, 600EX-RT Nikon: SB-24, SB-25, SB-26, SB-28(DX) SB-50DX, SB-80DX, SB-600, SB-700, SB-800, SB-900, SB-910 Sony: HVL-F60M, HVL-F58AM, HVL-F56AM Olympus: FL-50R, FL-600R Yongnuo: YN560, YN560-II, YN560-III, YN568EX-II, YN565EX Neewer: TT560, NW680/TT680 Bolt: VX-710, VX-760, VS-510, VS-560 Bower: SFD680C, SFD728, SFD885, SFD926, SFD970 Pentax: AF540FGZ, AF540FGZ II, AF360FGZ Sigma: EF-610 Metz: 44 AF-1, 52 AF-1, 52 AF-2, 58 AF-1, 58 AF-2 Vivitar: DF-286, DF-293, DF-383, DF-483, DF-583, 385HV Phottix: Mitros, Mitros+ Other similarly sized flash units
MagMod Professional Flash Kit
Make the most of your on-camera flash with the array of modifiers made available in the
Professional Flash Kit
from
MagMod
. This bundle stars the MagGrip, a simple and effective solution for attaching and removing accessories from your flash through the use of magnets. The kit then bundles in a variety of modifiers, including the MagSphere diffuser, the MagBounce, the MagGrid, and the MagGel with the Creative Gel Set.
MagSphere
Transform your on-camera flash into an omni-directional light source with the
MagSphere
, designed for use with the
MagMod
flash modifier system. The soft, diffuséd light is flattering and it has an integrated gel slot for adjusting the color of your flash. The two neodymium rare-earth magnets allow it to quickly attach to a separately available MagGrip, as well as other modifiers, such as a MagGrid, for more control over your light. Additionally, it is made from molded silicone rubber for a sleek, simple design with good durability and it comes with a microfiber carrying pouch.
MagBounce
Increase the apparent size of your flash by about 300% with the
MagBounce
, designed for use with the
MagMod
flash modifier system. The soft, diffuséd light produced by this attachment functions similarly to a softbox and cast the beam over a large area. Also, the MagBounce can be oriented in one of four different positions for use in both portrait and landscape shootings thanks to the attachment with four neodymium rare-earth magnets. With this system, the MagBounce can be uséd in combination with other accessories, such as the MagGel. It is made from molded silicone rubber for a sleek, simple design with good durability and comes with a microfiber carrying pouch.
MagGrid
Control light spill and narrow your flash's beam angle to 40° with the
MagGrid
, designed for the
MagMod
flash modifier system. This grid efficiently focuses the light and attaches to the MagGrip via two neodymium rare-earth magnets. Also, it is stackable with other accessories and even other MagGrids, allowing users to further narrow their beam angle. It is made from molded silicone rubber for a sleek, simple design with good durability.
MagGel Holder
Mount and swap out gels on your flash quickly and easily with this
MagGel Holder
for the
MagMod
modifier system. The silicone rubber slot holds up to 3 MagMod gels and snaps on to the MagMod system via two neodymium rare-earth magnets. Also, it is stackable with additional holders and other MagMod accessories.
Creative Gel Set
Add some flair and creativity to your lighting with this
Creative Gel Set
designed for use with the
MagMod
flash modifier system. The kit includes red, orange, yellow, green, blue, teal, purple, and magenta gels made from a rigid polycarbonate for durability and easier handling. They easily slide into the MagMod gel slot for quick attachment and removal.
MagGrip
Made from an elastic silicone rubber, the
MagGrip
from
MagMod
stretches over the head of most on-camera flash units and provides two neodymium rare-earth magnets for quickly mounting a variety of accessories from the MagMod flash modifier system. The rubber offers a secure, tight grip on the flash head and is durable. Also, the flash head should be about 2.5" wide for the modifiers to be able to properly attach to the flash head.
Compatible Flashes
Canon:
380EX, 420EX, 430EX, 430EX II, 540EZ, 550EX, 580EX, 580EX II, 600EX-RT
Nikon:
SB-24, SB-25, SB-26, SB-28(DX) SB-50DX, SB-80DX, SB-600, SB-700, SB-800, SB-900, SB-910
Sony:
HVL-F60M, HVL-F58AM, HVL-F56AM
Olympus:
FL-50R, FL-600R
Yongnuo:
YN560, YN560-II, YN560-III, YN568EX-II, YN565EX
Neewer:
TT560, NW680/TT680
Bolt:
VX-710, VX-760, VS-510, VS-560
Bower:
SFD680C, SFD728, SFD885, SFD926, SFD970
Pentax:
AF540FGZ, AF540FGZ II, AF360FGZ
Sigma:
EF-610
Metz:
44 AF-1, 52 AF-1, 52 AF-2, 58 AF-1, 58 AF-2
Vivitar:
DF-286, DF-293, DF-383, DF-483, DF-583, 385HV
Phottix:
Mitros, Mitros+
Other similarly sized flash units
×
×
×
×
×
Buy now!
Tell a friend
Visit store
Watch now
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© PROCAM Photo & Video Gear
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
Additional Information:
PROCAM RETURN POLICY
Items purchased from PROCAM online or in-store can be returned within 14 days from the date of purchase with the original sales receipt for refund or exchange.
You may return unopened / unused items within 14 days for a full money back refund, excluding any shipping charges. Any returned items that have been opened and/or used are subject to a 15% restocking fee, No Exceptions.
Items sent back to us without a return authorization will not be accepted.
All returns are subject to inspection. Any products missing UPC codes or serial numbers from the box are NOT returnable. Any returns without all original packaging, cables, accessories, manuals and documentation will be rejected.
PROCAM reserves the right to reject any return at our discretion. Items returned after 14 days will not be accepted. We reserve the right to refuse any return and/or exchange if we believe the items are intentionally used, damaged or misused.
After 14 days, all merchandise is considered used and may be considered for trade-in credit purposes only.
Free shipping items will have all shipping costs deducted from the refund total.
NON-RETURNABLES
We do not accept for refund or exchange the following products once opened:
Software when seal is broken
Open memory cards
Batteries
Backgrounds (Cloth & Paper)
Film
Photographic & Inkjet Paper
Light Bulbs / Flash Tubes
Ink cartridges
Printers
Motorized Gimbals/Stabilizers
Cinema Cameras / Lenses
Profoto Lighting & Accessories
Black Magic Products
DJI Products
Drones & Accessories
Non-stocked / Special Order Items
*Exceptions in cases of product being defective or DOA. Opened items that qualify as defective can be returned for exchange or refund within 7 days of purchase. Defective and DOA (Dead on Arrival) is defined as a brand new item that will not turn on or does not function initially as a manufactures defect.
eBay integration
by